Omicron Device Link; Installing Omicron Device Link; Accessing The Otmc 100 Web Interface - Omicron Lab OTMC 100 Series User Manual

Hide thumbs Also See for OTMC 100 Series:
Table of Contents

Advertisement

OTMC 100 Series User Manual
9

OMICRON Device Link

Using OMICRON Device Link it is possible to access network compatible OMICRON devices.
OMICRON Device Link automatically finds all OMICRON and OMICRON Lab devices available in the
computer network.
For a detailed description of OMICRON Device Link, please refer to the OMICRON Device Link help.
To display the help, launch OMICRON Device Link and then press the F1 key on your keyboard, or
click the
symbol on the top right and select Help.
9.1

Installing OMICRON Device Link

OMICRON Device Link and its installation program Setup Wizard are included on the CD ROM
accompanying OTMC 100. The content of the CD ROM is also available for download at
www.omicron-lab.com. Proceed as follows to install OMICRON Device Link:
1. Exit all other major programs running on your computer.
2. Insert the CD ROM into your computer's CD ROM drive and click Install Device Link on the start
page. Should the start page not be displayed automatically a few seconds after the CD has been
inserted into the CD ROM drive, change to the Windows Explorer and double-click autorun.exe on
the CD ROM.
3. Follow the instructions displayed on the screen to install the software.
9.2

Accessing the OTMC 100 web interface

Proceed as follows to access the OTMC 100 web interface using OMICRON Device Link:
1. Launch OMICRON Device Link.
2. OMICRON Device Link will automatically find and display your OTMC 100.
The vertical bar on the left displays the device status:
Green bar: The device is online and ready for operation.
Gray bar: The device is offline. Connect your OTMC 100 to the Ethernet network. If the
network is not able to supply your OTMC 100 via PoE (Power over Ethernet), use a PoE
injector to supply your OTMC 100 with power.
Red bar: The device is online but not accessible due to incorrect IP configuration.
OTMC 100 is usually configured to obtain the IP address automatically. However, it is also
possible to assign a static IP address to your OTMC 100. In this case, the following behavior
applies:
82
OMICRON

Advertisement

Table of Contents
loading

This manual is also suitable for:

Otmc 100iOtmc 100p

Table of Contents