Omicron Lab OTMC 100 Series User Manual page 65

7.3.3.3 Port pane
Transport
Enable VLAN
VLAN ID
VLAN PCP
OMICRON
Displayed as list box for the PTP profiles Default P2P and Default E2E.
For all other profiles, the entry is fixed to "IEEE 802.3".
Select the transport mechanism (network protocol) from the list. The
protocols available in the list depend on the PTP profile selected:
UDP IPv4: User Datagram Protocol (UDP) for Internet Protocol (IP)
version 4. Only available for PTP profiles Default E2E and Default P2P.
UDP IPv6: User Datagram Protocol (UDP) for Internet Protocol (IP)
version 6. Only available for PTP profiles Default E2E and Default P2P.
IEEE 802.3: Ethernet protocol according to IEEE 802.3.
Use this check box to enable or disable the usage of VLAN tags for PTP
packets. The Power profile according to IEEE C37.238-2011 requires an
IEEE 802.1Q VLAN tag. However, for compatibility reasons it is possible
to disable it. Only available for PTP profile Power (C37.238-2011)
(OTMC 100p only).
Use this field to specify the VLAN ID. The Power profile according to
IEEE C37.238-2011 requires an IEEE 802.1Q VLAN tag. This value
represents the VID (VLAN Identifier) field (12 bits) within the TCI (Tag
Control Identifier). See "VlanId" in IEEE C37.238-2011. Only available
for PTP profile Power (C37.238-2011) (OTMC 100p only).
Use this field to specify the VLAN PCP. The Power profile according to
IEEE C37.238-2011 requires an IEEE 802.1Q VLAN tag. This value
represents the PCP (Priority Code Point) field (3 bits) within the TCI (Tag
Control Identifier). Only available for PTP profile Power (C37.238-2011)
(OTMC 100p only).
The OTMC 100 web interface
65