Table of Contents
Advertisement
OTMC 100 Series User Manual
Click this tab to configure the IPv4 settings according to your needs:
IPv4 disabled
IPv4 static IP address
IPv4 DHCP on
7.3.1.3
IPv6 tab
Click this tab to configure the IPv6 settings according to your needs:
IPv6 disabled
IPv6 static IP address
IPv6 auto configuration
IPv6 auto configuration
(manual DNS)
56
IPv4 is switched off.
Select Static to set the IP address manually. The page then enables
the fields for entering the IP address, the Network mask, the
Gateway address and the Name server address in dot-decimal
notation (for example: 192.168.1.100).
The IP address is assigned automatically by a IPv4 DHCP server (if
available in the network) or the OTMC 100 itself. The IP address
assigned is displayed in the
the
Overview page
(see page 35).
IPv6 is switched off.
Select Static to set the IP address manually. The page then enables
the fields for entering the IP address, the Gateway address and the
Name server address in hexadecimal notation (for example:
2607:f0d0:2001:a::10), and the Network mask in decimal notation.
The IP address is assigned automatically using the Stateless
Address Autoconfiguration (SLAAC). The IP address assigned is
displayed in the
Network status page
Overview page
(see page 35).
Additionally, the user has the option to manually specify DNS servers
by selecting the IPv6 auto configuration (manual DNS) option and
entering DNS server addresses to the Name server fields (in
hexadecimal notation, for example: 2607:f0d0:2001:a::10).
Network status page
(see page 50) and
(see page 50) and the
OMICRON
Advertisement
Table of Contents
