Omicron Lab OTMC 100 Series User Manual page 57

7.3.1.4 Services pane
Use this pane to enable or disable individual services and processes running on the OTMC 100
system.
All services are enabled by default. Disabling services that are not used or required for your
specific application will enhance the device security.
Precision Time Protocol (PTP) Select the checkbox to enable PTP support (propagation of time
Network Time Protocol (NTP)
Internet Time Service /
Daytime Service
OMICRON Device Link
Zeroconf
Simple Network Management
Protocol (SNMP)
File Transfer Protocol (FTP)
Trivial File Transfer Protocol
(TFTP)
OMICRON
information via PTP in the network).
Select the checkbox to enable NTP support (propagation of time
information via NTP in the network).
Select the checkbox to enable Time/Daytime support (propagation of
time information via the Time and Daytime protocol).
Select the check box to enable the service used by OMICRON
Device Link or Device Browser to automatically detect OMICRON
devices in the network.
Select the checkbox to enable detection of OTMC 100 devices in the
network by clients that are able to handle mDNS/DNS-SD (e.g., the
Apple Bonjour tool, as an alternative to the OMFIND service used by
OMICRON Device Browser).
Select the checkbox to enable access via SNMP.
Select the checkbox to enable access via FTP. OTMC 100 is able to
provide FTP server functionality, which can be used for example to
transfer a configuration file to OTMC 100.
Select the checkbox to enable access via TFTP. OTMC 100 is able
to provide TFTP server functionality, which can be used for example
to download a configuration file from OTMC 100.
The OTMC 100 web interface
57