Omicron Lab OTMC 100 Series User Manual page 36

OTMC 100 Series User Manual
UTC date/time Displays the UTC date and time. The local time can be derived from the UTC
time (Universal Time Coordinated) by adding or subtracting hours according to
the specific time zone. For example, UTC plus one hour delivers the Central
European Time CET (two hours during daylight saving time).
Information
Product name Displays the exact product name.
Serial number Displays the serial number of OTMC 100.
Software version Displays the software version currently installed on OTMC 100.
Kernel version Displays the kernel version used in the currently installed operating software.
Hardware revision Displays the hardware version of OTMC 100.
Uptime Displays the time OTMC 100 is in operation since the last power-up.
Network
IPv4 address Displays the currently assigned IPv4 address of OTMC 100.
If configured dynamically, the IP address is assigned automatically by a IPv4
DHCP server (if available in the network) or the OTMC 100 itself.
The IPv4 address can also be set manually by the user.
See also
IPv6 address Displays the currently assigned IPv6 address of OTMC 100.
If configured dynamically and a IPv6 router is available in the network, the IP
address is assigned automatically.
The IPv6 address can also be set manually by the user.
See also
MAC address Displays the unique MAC address (Media Access Control Address) of
OTMC 100.
Hostname Displays the hostname of OTMC 100. The default hostname is a combination of
the device type and the serial number separated by dash (example:
OTMC100p-AA001A) and can be changed by the user. The serial number is
available on the type plate on the bottom side of OTMC 100 (labeled "SerNo").
See also
Domain name Displays the domain name set by the user (example: omicron.at).
See also
36
Network configuration page
Network configuration page
Network configuration page
Network configuration page
on page 55.
on page 55.
on page 55.
on page 55.
OMICRON