Omicron Lab OTMC 100 Series User Manual page 51

7.2.4.1 General pane
The General pane displays the general configuration settings of OTMC 100.
Hostname
Domain name
MAC address
Name in Device Link
7.2.4.2 IPv4 pane
The IPv4 pane displays the IPv4 specific configuration settings of OTMC 100. The IPv4 configuration
is set in the Network configuration
Configuration
IP address
Network mask
Gateway
Name server 1
Name server 2
OMICRON
Displays the hostname of OTMC 100. The default hostname is a
combination of the device type and the serial number separated by
dash (example: OTMC100p-AA001A) and can be changed by the
user in the Network configuration
is available on the type plate on the bottom side of OTMC 100
(labeled "SerNo").
Displays the domain name set by the user in the
configuration, for example, omicron.at (see page 55).
Displays the unique MAC address (Media Access Control Address)
of OTMC 100.
Name under which the OTMC 100 device is displayed in OMICRON
Device Link. You can set this name in the
(see page 55).
Displays the configuration method selected for IPv4.
IPv4 disabled: IPv4 is switched off.
IPv4 static IP address: The IP address was assigned manually by
the user.
IPv4 DHCP on: The IP address was assigned automatically by a
DHCP server.
Displays the currently assigned IPv4 address of OTMC 100 (for
example: 192.168.1.100).
Displays the network mask in dot-decimal notation (for example:
255.255.255.0).
If set, this parameter displays the gateway address in dot-decimal
notation (for example: 192.168.1.1).
If set, these parameters display the address of the first and second
name server selected in dot-decimal notation (for example:
192.168.1.50).
The OTMC 100 web interface
(see page 55). The serial number
Network
Network configuration.
51