Check Counting - KERN FKB 6K0.02 Operating Manual


The balance will calculate the average item weight and then displays the quantity of
pieces.

Remove reference weight. The balance is now in parts counting mode counting all
units on the weighing pan.
2. Parts counting

Put the empty container on the weighing pan and press the TARE button. The
container is tared, the zero display will appear.

Fill the counting quantity. The piece quantity is shown in the display.
With the - key you can switch between number of items and weight
display

11.2.2 Check counting

The balance allows weighing of goods until a certain target quantity is reached within
defined tolerance limits. With this function one can also check if the weighing good is
within a defined tolerance range.
Reaching the target value is indicated by an acoustic (if activated in menu) and an optic
signal (tolerance mark
Optical signal:
The tolerance marks provide the following information:
Target quantity exceeds defined tolerance
Target quantity within defined tolerance
Target quantity below defined tolerance
Audio signal:
The acoustic signal depends on the menu setting
< setup  beeper >, see chap. 13.3.1.
FKB-BA-e-2010
, , ).
27