Basic Operation; Turn On/Off; Simple Weighing; Weighing With Tare - KERN FKB 6K0.02 Operating Manual

8 Basic Operation

8.1 Turn on/off

Start-up:

Press the ON/OFF button.
The display lights up and the balance carries out a selftest.
Wait until the weight display appears, then the balance is ready for weighing.
Switch off:

Keep ON/OFF button pressed until the display disappears

8.2 Simple weighing


Check zero display [>0<] and set to zero with the help of the TARE–key, as
required.

Place goods to be weighed on balance.

Wait until the stability display appears (

Read weighing result.
Overload warning
Overloading exceeding the stated maximum load (max) of the device,
minus a possibly existing tare load, must be strictly avoided. This could
damage the instrument. Exceeding the maximum load is indicated by
. Unload balance or reduce preload.

8.3 Weighing with tare

8.3.1 Taring

The dead weight of any weighing container may be tared away by pressing a button, so
that the following weighing procedures show the net weight of the goods to be weighed.

Put the weighing container on the weighing pan

Wait until the stability display appears (
The weight of the container is now internally saved. The zero display and the
indicator „TARE" will appear. „TARE" informs that all shown weight values are net
values.

Weigh the material.

Wait until the stability display appears (

Read net weight.
FKB-BA-e-2010
).
), then press TARE key.
).
19