Operating Concept - KERN FKB 6K0.02 Operating Manual

9 Operating concept

From factory the balance is delivered with various applications (normal weighing, check
weighing, counting). After the first start-up the balance is in the <Weighing> application.
In the application menu (see chap.13.2.) however, you can define, selecting an
application, in which mode the balance after switching-on has to continue working.
Either as per standard in weighing mode or e.g. as check balance or counting balance
Note: The number of the installed applications depends on the model.
Selecting an application:

Press the TARE button and keep it pressed until the first menu item will be
displayed

Use the TARE button to select the menu setting < mode > and acknowledge with
 button. The current setting will be displayed.

Use the TARE button to select the desired mode, selectable
weig h
count
check

Confirm with  button.
According to the selected application in the application menu just appear the
application-specific settings, so that you reach the target quickly without detour.
• Information about the application-specific settings you will find in the
description of the respective application.
• All basic settings and parameters, which influence the whole operation of
the balance, are resumed in the Setup Menu (see chap.13.3.).
These settings remain valid for all applications.
Change application:

Press the TARE and ON/OFF button at the same time and keep them pressed
until the first menu item of the setup menu will be displayed

Use the TARE button to select the menu setting < mode > and acknowledge with
 button. The current setting will be displayed.

Use the TARE button to select the desired mode and acknowledge
with  button.
FKB-BA-e-2010
Weighing mode
Counting mode
Check mode
21