Tolerance Check For Pieces Counting; Manual Total Memory - KERN CPB 3K0.1 Operating Manual

9.4 Tolerance check for pieces counting

An acoustic signal is sounded as soon as the number of parts placed on the balance
reaches or exceeds a pre-set limit.
Determine limit value:
Enter limit value via number keys
Confirm within 5 sec:
Delete limit value:
Enter limit value "0" and confirm

9.5 Manual total memory

This function allows you to execute several weighing procedure. After that, the total
parts counting and the number of weighing procedures will be displayed.
1. Weighing:
• Select a reference weight
• If you are using a weighing container
use the TARE key for taring
• Enter the desired quantity for the first
weighing
• Add weighing value into the memory
• Unload your balance
48
F4 AV QFF
Activate function „
Piece weight
PRESET
The arrow above the PRESET symbol
shows a saved limit value.
", see chapt.10
Piece weight
PRESET
The arrow above the M symbol indicates
a saved value.
5.00
5.00
Pcs
10
CPB-BA-defsi-0611