Microscan Visionscape FrontRunner User Manual page 96

Chapter 3
Camera Calibration
Under "Select the Camera to Calibrate", highlight (to select) a
9.
camera.
–
–
Click Next.
10.
FrontRunner™ displays the Calibration screen shown in Figure 3–3.
3-4 Visionscape FrontRunner™ User's Manual
If you select "I Want to Calibrate a Particular Camera, and apply it
to all Snapshots that use that Camera", "Select the Camera to
Calibrate" will list the cameras that are being used in the current
Job.
If you select "I Want to Calibrate Each Snapshot Individually",
then each Inspection step is listed, with each of its Snapshots
underneath.
v4.1.3, April 2012