Assembling The Base With The Column Unit - Vatech PaX-i Plus Manual

4. Installing the Equipment: Base Stand (Optional)
4.2

Assembling the Base with the Column Unit

1. Hang the base unit onto two bolts temporarily as shown as shown as below.
42
If the installation site is a concrete floor, go to the section 4.5 Fixing
the base (Optional) and do number 1 first, after that turn back 4.2
Assembling the Base with the Column Unit.
An installer should hold the base unit to keep it from falling down.
PaX-i Plus / Insight Installation Manual