Installing Software; Before Beginning - Vatech PaX-i Plus Manual

9.

Installing Software

9.1

Before Beginning

PaX-i Plus / Insight Installation Manual
Disregard this section in case the PC system is supplied with the
equipment. (The software has already been installed.)

Ensure that the Emergency Stop Switch is in OFF position
prior to starting with the InstallPakage installation.

Do not install the programs irrelevant to image acquisition and
view on the same PC. There may be subtle conflicts between
them, leading to the malfunction.

The image viewer program such as EzDent-i or the one from
the 3rd party should be installed in advance before the
InstallPakage installation. For the information on their
installation procedures, refer to the corresponding manuals.

Before InstallPakage installation, ensure that the video card
driver installed on the PC is the most up-to-date version. To
check this, go to the Website: www. nvidia.com.

Perform virus scan for the PC and InstallPakage program with
the anti-virus program prior to proceeding with its installation.
9. Installing Software
95