Install Cylinder Head Cover Sub−Assy - Toyota 1CD-FTV Manual

New Gasket
1CD−FTV ENGINE REPAIR MANUAL (RM1046E)
ENGINE MECHANICAL
Hollow
Screw
SST
A86430
55.
: Seal Packing
(a)
(b)
(c)
(d)
A09663
−
PARTIAL ENGINE ASSY (1CD−FTV)(From September,
2003)
(2) Using SST (a turbocharger pressure gauge), attach
SST to the fuel return side of the nozzle leakage
pipe, then maintain 100 kPa (1.0 kgf/cm
of pressure for 60 seconds to check that there are
no bubbles from the pipe connection.
SST 09992−00242
(3) After checking fuel leaks, wipe off soapy water from
the pipe connection.
INSTALL CYLINDER HEAD COVER SUB−ASSY
Remove any old packing (FIPG) material.
Apply seal packing to the cylinder head.
Seal packing: Part No. 08826−00080 or equivalent
Install the gasket to the head cover.
Install the cylinder head cover with 10 bolts.
Torque: 13 N×m (135 kgf×cm, 9.7 ft×lbf)
14−25
2
, 14.5 psi)