Improper Operation; Changes / Use Of Spare Parts - Berner System 60/20 Manual

Hide thumbs

Table Of Contents

Table of Contents

To avoid overheating of the pans by empty cooking, do not heat the pan unattended and

without cooking.

Turn off the heating zone if you take the pan away for a while. This prevents the heating

process from automatically start when a pan is placed back on the heating zone. Thus,

unattended heating is avoided, i.e. a person who wants to use the inductiongerät must start

the heating process by switching on the device or by turning the power controller to 'ON'.

Do not use the cooking surface as a shelf!

Do not place paper, cardboard, fabric etc. between the pan and ceramic field as it could

ignite. Aluminium foils and plastic vessels must not be placed on the hot surfaces.

Care must be taken to ensure that during the operation of the device, items worn by the

user, such as.B rings, watches, etc., can become hot when they come close to the cooking

level.

After use, the hot plate must be switched off by means of its control and/or control device.

Do not rely on pot detection.

Do not place credit cards, phone cards, cassettes or other magnetic-sensitive items on the

ceramic field.

Only recommended types and sizes of vessels may be used.

The inductiongerät has an internal air cooling system. Avoid obstructing the air supply and air

outlet zone with objects (e.B. fabric). This would cause overheating and therefore the device's

shutdown.

Avoid the entry of liquids into the device and overflow water or cooking material over the

edge of the pan. Do not clean the device with a water jet.