Warm Holder; Warm Holder With Potentiometer; Warm Holder With Touch - Berner System 60/20 Manual

Performance icon
Temperature icon

Warm holder

In contrast to the warming function, which can be switched as an option for power induction, the
hot holder is a separate application. (see applications)
The hot holder is a pure temperature control unit. There are 2 temperature ranges to choose
from: 60-90°C, 60-150°C
The temperature is measured by means of PT1000 sensors under the ceramic glass.
Display Example
Setpoint
Actual
Residual
heat

Warm holder with potentiometer

With the potentiometer, the set temperature can be set
The knob can be rotated via the 0 position. This means that a quick changeover
from a low to a high setting value and vice versa.
Elements Description
Rotary switch
0 position
Rotary switch
Range α40°-320°

Warm holder with touch

Instead of the potentiometer (Poti must NOT be connected), the touch display takes control.
The device is switched on by means of the on-off button.
The temperature range is from 70-250°C in 2°C increments with the ups and downs
Adjustable. The temperature is stored.
Ver. 3.6
rotation
lights up with power control,
flashes in power mode when pot detection
illuminates with temperature control,
flashes in temperature mode when pot
detection
Importance Declaration
Setpoint 90°C
Temperature too
low
Setpoint is represented by point.
Setpoint 90°C
Point on the right indicates heating
Temperature +/-
status
4°C
Setpoint 90°C
Temperature too
high
Actual value
125°C
Temperature too
low Actual value appears every 10 sec for 2
sec.
Actual value
105°C
Temperature too
low
Warning "Hot"
Induction switched off and actual value
Residual heat
> 45°C, every 10 sec for 2 sec.
indicator
Function
From
Temperature
Page 19 Of 44
© Bernese cooking systems 2018
17.07.2014