Hot Holder With Spin Control; Powerstar Function Double Generator ( Devices With 400V Double Generator Bipds ) - Berner System 60/20 Manual

Elements Description
On-Off button
On button
From Taste

Hot holder with Spin Control

The set temperature is set on the knob. The direction of rotation has no influence
function, as only the temperature control is supported with the hot holder.
Elements Description
Rotary switch
0 position
Rotary switch
Range α40°-320°
The set temperature is displayed on the 3-digit display.
The LED ring is also connected to the set temperature range with abrightly
Displayed.
The actual temperature is shown as a weak luminous tail above or below the set temperature LED.
When the target temperature isreached, no tail is visible.
Elements Description
Arrow Right
Arrow Left
Temperature icon

Powerstar function double generator ( devices with 400V double generator BIPDS )

There can be 2 cooking points with a maximum power of 1.8/3.5/5.0 kW each or only the front
cooker with 3.5/5.0/7.0 kW or the rear cooker with 3.0/5.0/7.0 kW.
The Power Star QUnktIon Wird WIe Qolgt AktIvieRt:
Vordere KocHstelle Belegt, hintHee AusgeschaAccordingen=
Ver. 3.6 3.5/5.0/7.0 kW
HintHee KocHstelle Belegt VordHee AusgeschaAccordingen=
Function
Button for 1 sec to press
Switching on or off
Setpoint setting
Quick press: increment in 2 steps
Long actuating: increment in 10 steps
Setpoint setting
Quick press: decrement in 2 steps
Long actuating: decrement in 10 steps
Function
From
Temperature
Function
indicates the function-dependent direction of
rotation
indicates the function-dependent direction of
rotation
illuminates with temperature control,
flashes in temperature mode when pot
detection
Page 20 Of 44
© Bernese cooking systems 2018
17.07.2014