Function With Priority Circuit (Dual Potentiometer Control (Optional)) - Berner System 60/20 Manual

Pot rating premium with 4 display touch
er or
A pot symbol appears on the left side of the display, next to it a number from 1 to 9.
The larger the number, the better the cookware.
The display goes off after 10 seconds.
Pot rating premium with Spincontrol
The pan symbol at the bottom right lights up, the pan quality is shown with weaker luminous LEDs
from the LED ring. With 100% pot quality, all
remaining 31 ring LEDs at 50% the lowest 16, at 10% the first 4.
The display goes off after 10 seconds.

Function with priority circuit (Dual Potentiometer control (optional))

If a second controller is inserted in addition to the standard controller, then the following rule is
automatically switched to dual operation (except the master potentiometer function is switched
on),whereby thefollowing rule applies:
Only the potentiometer, which comes from the 0 position, specifies the power.
In order to regain the command at a potentiometer that has already been switched on, it must
be briefly rotated to the 0 position.
If a potentiometer is finally turned into the 0 position, the cooking area is switched off.
After a power failure, the last set operation continues.
Potentiometer 1 Potentiometer 2 Behavior
Page 24 Of 44 17.07.2014
Ver. 3.6 © Bernese cooking systems 2018