Power Control With Touch; Power Control With Spin Control; Warming Function (Optional); How Do I Use The Warm-Up Function - Berner System 60/20 Manual

Table of Contents

Advertisement

Power control with touch

Instead of the pot (Poti must NOT be connected) the touch display takes over
control.
The device is switched on by means of the on-off button.
Performance is set in whole increments from level 1 to 9.
(When the warming function is activated, the power control is done in half steps)
Elements Description
On-Off button
On button
Ab button

Power control with Spin Control

The set temperature is set on the knob. The direction of rotation has no influence
to the function, since in the induction cooktop without a warming function only the
performance control is supported.
Elements Description
Rotary switch
0 position
Rotary switch
Range α40°-320°
The power level is displayed on the 3-digit display in the middle.
For this purpose, the LED ring with a strongly luminous LED displays the power position parallel to
the rotary knob. When it is moved, a tail appears as an optical effect.
Elements Description
Arrow Right
Arrow Left
Performance icon

Warming function (optional)

How do I use the warm-up function

When using this function by means of gags (W70-W110) or activating by the touch control
panel, the warming function is active. Attention must be made to ensure that the pot dishes
must always be placed in the middle of the cooking area (temperature sensor coil).
The warming function is released as an option for the induction cooktop individually per channel.
(see controls). Thus, the hob also has a temperature control in addition to the power control. The
use of the two functions is subject to the different operating concepts.
For grill and hot holder applications, the warming function has no meaning.
Ver. 3.6
Function
Button for 1 sec to press
Switching on or off
increment in 1 steps
decrement in 1 steps
Function
From
Power level 1-9
Function
indicates the function-dependent direction of
rotation
indicates the function-dependent direction of
rotation
lights up with power control,
flashes in power mode when pot detection
Page 16 Of 44
© Bernese cooking systems 2018
17.07.2014

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents