Schulte FX-209 Operator's Manual page 88

Extreme care should be taken when operating near loose objects such
as gravel, rocks, wire, and other debris.
mowing. Foreign objects should be removed from the site to prevent
machine damage and/or bodily injury or even death. Any objects that
cannot be removed must be clearly marked and carefully avoided by the
operator.
Repair all damage and make certain rotor or blade carrier is balanced
before resuming mowing.
Many varied objects, such as wire, cable, rope, or chains, can become entangled in the
operating parts of the mower head. These items could then swing outside the housing at
greater velocities than the blades. Such a situation is extremely hazardous and could result
in serious injury or even death. Inspect the cutting area for such objects before mowing.
Remove any like object from the site. Never allow the cutting blades to contact such items.
(SGM-06)
FX-209 07/19
© 2019 Alamo Group Inc.
OPERATION
Stop mowing immediately if blades strike a foreign object.
(SGM-05)
Operation Section 4-32
Inspect the area before