Table of Contents
Advertisement
•
Inspect the gearbox oil level using the dipstick
level indicator and replenish if needed
•
Ensure the gearbox vent is in place and free
from clogs.
•
Inspect blades and blade bolts for looseness
and excessive wear. Make sure the mower is
securely blocked up before crawling beneath.
Replace damaged, worn and missing blades as
complete sets to maintain rotary balance during
operation.
•
Ensure blade pan nut is tightened with the
cotter pin inserted and spread. OPS-R-0041
Replace bent or broken blades with new blades. NEVER ATTEMPT TO STRAIGHTEN,
WELD, OR WELD HARDFACING ON BLADES SINCE THIS WILL LIKELY CRACK OR
OTHERWISE DAMAGE THE BLADE WITH SUBSEQUENT FAILURE AND POSSIBLY
CAUSE SERIOUS INJURY FROM THROWN BLADES.
FX-209 07/19
© 2019 Alamo Group Inc.
OPERATION
Operation Section 4-22
(SGM-10)
Advertisement
Table of Contents
