Schulte FX-209 Operator's Manual page 58

Schulte FX-209 rotary cutters are manufactured with quality material by skilled workers. These cutters are
designed to cut grass, weeds, crop stalks, brush and other vegetation up to 2" diameter. The cutter is equipped
with protective deflectors and chain guards to prevent objects being thrown from the cutter by the blades,
however, no shielding is 100% effective. All shields, guards, deflectors, and chains equipped on the unit must
be maintained on the mower in good operational condition.
It is the operator's responsibility to be knowledgeable of all potential operating hazards and to take every
reasonable precaution to ensure oneself, others, animals, and property are not injured or damaged by the
cutter, tractor, or a thrown object. Do not operate the cutter if passersby, pets, livestock, or property are within
300 feet of the unit.
This section of the Operator's Manual is designed to familiarize, instruct, and educate safe and proper cutter
use to the operator. Pictures contained in this section are intended to be used as a visual aid to assist in
explaining the operation of rotary cutter and are not necessarily of a FX-209 cutter. Some pictures may show
shields removed for picture clarity. NEVER OPERATE this implement without all shields in place and in good
operational condition. The operator must be familiar with the cutter and tractor operation and all associated
safety practices before operating the cutter and tractor. Proper operation of the cutter, as detailed in this
manual, will help ensure years of safe and satisfactory use.
IMPORTANT: To avoid mower damage, retorque all bolts after the first 10 hours of operation.
READ AND UNDERSTAND THE ENTIRE OPERATING INSTRUCTIONS AND SAFETY SECTION OF THIS
MANUAL AND THE TRACTOR MANUAL BEFORE ATTEMPTING TO USE THE TRACTOR AND
IMPLEMENT. If you do not understand any of the instructions, contact your nearest authorized dealer for a
full explanation. Pay close attention to all safety signs and safety messages contained in this manual and
those affixed to the implement and tractor. OPS-U- 0001
READ, UNDERSTAND, and FOLLOW the following Safety Messages. Serious injury or
death may occur unless care is taken to follow the warnings and instructions stated in the
Safety Messages. Always use good common sense to avoid hazards.
Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las
medidas de seguridad.
FX-209 07/19
© 2019 Alamo Group Inc.
OPERATION
SCHULTE FX-209 ROTARY CUTTER
OPERATION INSTRUCTIONS
(SG-3)
Operation Section 4-2
(SG-2)