Table of Contents
Advertisement
All Safety Shields, Guards and Safety devices including (but not
limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox
Shields, PTO integral shields, and Retractable Door Shields should
be used and maintained in good working condition. All safety
devices should be inspected carefully at least daily for missing or
broken components.
replaced at once to reduce the possibility of injury or death from
thrown objects, entanglement, or blade contact.
•
Lift Type - Ensure the Wheel Arm caster frame
Height Adjustment Lug and Lock Link are
properly installed and fully secured at correct
cutting height.
•
Pull Type - Ensure that the Levelling Rod and
hydraulic cylinder are installed and retained
correctly to provide desired cutting height.
•
Inspect all bolts and screws and tighten to the
recommended torque.
•
Ensure the tractor PTO master shield and the
mower slip clutch shield are in place, lowered,
and in good condition.
•
Ensure the driveline integral shield is in good
condition and rotates freely.
•
Ensure the driveline slip clutch (if equipped) is
properly adjusted. OPS-R-0039
FX-209 07/19
© 2019 Alamo Group Inc.
OPERATION
Missing, broken, or
worn items must be
Operation Section 4-21
(SGM-3)
Advertisement
Table of Contents
