Handy Studio; Process - Revopoint 3D Technologies POP User Manual

POP �D Scanner User Manual

Handy Studio

Double click to open the post-processing software： Handy Studio.
Both single model and multi-model processing are supported in the Handy Studio;
The "Process" button at the bottom of the menu bar is for single-model processing, and the
"Merge" button is for multi-model processing, you can select between the two.
Process (Single-model processing）
convert the point clouds into mesh/plane
clip the model plane
fill holes on the model surface
smooth the flat/curved surface
generate left-and-right mirror image of the scanned model
cancel the current operation and revert to the previous state
export the scanned file. (Note: save the model in Ply. /Stl. / Obj..)
Click the drop-down button next to "Model" button and select local model ;
Import scanned �D model
��
COPYRIGHT@���� REVOPOIN�D ALL RIGHTS RESERVED.
C