Revopoint 3D Technologies POP User Manual page 19

POP �D Scanner User Manual
When you see a "Miss track" warning during scanning, please target the POP cameras back
to the previous scanned model(blue area), and keep still for seconds to re-align the model,
when the green frames show, you can resume the scanning.
Too few points
When "Point Amount Few" prompt appears, check whether the distance between the
scanner and the object is too close or too far, adjust the distance to the appropriate range
before scanning.
��
COPYRIGHT@���� REVOPOIN�D ALL RIGHTS RESERVED.
C
When you see a "Miss Track" warning, please
target the POP cameras back to the scanned
model (blue area), and keep still for seconds,
so you can resume the scanning.