Revopoint 3D Technologies POP User Manual page 14

Start a new project
Click " Start a new project" , and refer to �.� for Scan Mode choosing;
Select "Texture" :
� Texture options:
Color: the object to be scanned will have both color and shape information on scanned
�D model;
No color: the object to be scanned will not shown its color on scanned �D model, only the
shape can be scanned.
Due to multiple �D printers are black-and-white, we choose "No Color" frequently.
Start/pause Scan
Click button to scan.
During the scanning, please make sure the point cloud in left down window is adequate,
and the distance remains "Excellent".
Move the scanner slowly and stably during scanning while keeping a relatively fixed
distance.
At the beginning of scanning, the captured frames (shown in blue) and the current frame (shown in green) will
display in the �D Model preview window. Newly scanned area(left down window) has no common feature with
the scanned(blue model).
In the picture above, there are too much distracting objects, such as the blue basket and paper box at a short
distance on the table. Make sure no irrelevant stuff in scanning aera.
Move �D scanner slowly: in case of fast moving, you can' t get a good scanning effect.
During the scanning, please make sure the
point cloud in the left right window is
sufficient and the distance is "Excellent"
C
POP �D Scanner User Manual
COPYRIGHT@���� REVOPOIN�D ALL RIGHTS RESERVED.
��