Viewing Captured Images And Videos - BenQ DC E1050t User Manual

6 Viewing captured images and videos

Viewing captured images and videos
To enter the playback mode, press
• To view the previous image/video, swipe and slide the screen (at least 1/3 of the width; see
the illustrations below from A to C) to the right, or tap
• To view the next image/video, swipe and slide the screen (at least 1/3 of the width) to the left,
or tap on the Control Panel.
• Press W and you can still use the Swipe-to-Slide feature to view captured images and
recorded videos in a loop.
• Press W again to view 12 thumbnails on the screen.
A
Control Panel
• You can toggle between the above two playback modes by pressing T and W.
• To zoom-in/out an image, press T or W, or you can use the stylus or your fingertip to
circle the area you want to zoom in directly on the screen. You can also drag the image
to see a certain area or tap
• If a photo was captured in the portrait orientation and then you saved it into the
landscape orientation, the photo will still rotate back into the portrait orientation
temporarily when you enlarge it on your camera.
• For a video file, tap
• Tap to start the slideshow playback.
• Tap for more options.
• Anytime in the playback mode, you can press
capture mode.
• For image/audio/video files captured by other devices, your camera may not be able to
show the detailed file information (such as resolution) or to edit them (using My
Drawings or Add Memo, for example).
to view the image or video just captured.
B
to crop the image.
to start playback.
on the Control Panel.
C
or the shutter to switch to the
D