Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co.,Ltd.
Mode 1
Mode 2
Mode 3
Note: If there is no low power consumption requirement, there is no need to care about WOR mode (mode 1).
6.1 Transparent Transmission Mode (Mode 0)
Type
When the M0 indicator light is off and the M1 indicator light is off, the radio is working in mode 0
Emission
The user can input data through the serial port, and the radio will start wireless transmission.
The radio receiving function is turned on, and the wireless data will be output through the serial port TXD
Receive
pin after receiving the wireless data.
6.2 WOR Mode (Mode 1)
Type
When the M0 indicator light is off and the M1 indicator light is off, the radio is working in mode 1
When defined as the transmitter, the wake-up code for a certain period of time will be automatically added
Emission
before transmission
Receive
Data can be received normally, the receiving function is equivalent to mode 0
6.3 Configuration Mode (Mode 2)
Type
When the M0 indicator light is off and the M1 indicator light is on, the radio is working in mode 2
Emission
Receive
Configurat
ion
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
WOR mode
Lights off
Configuration mode
Deep sleep mode
The user can access the register to configure the working status of the radio
Light on
Light on
Lights off
Light on
Light on
Can be configured wirelessly
Can be configured wirelessly
E96-DTU(400SL30-485) User Manual
special command air configuration.
Can be defined as WOR sender and WOR
receiver, support air wakeup
The user accesses the register through the
serial port to control the working status of the
radio station. The user can configure the radio
station
through
the
configuration software.
The radio goes to sleep
upper
computer
11
Advertisement
Table of Contents
