General Mode (Mode 0); Wor Mode (Mode 1); Configuration Mode (Mode 2) - Ebyte E90-DTU User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.
Configuration
Mode 2
Mode 3
★ Note: If there is no need for low power consumption, there is no need to care about the WOR mode (mode 1)。

7.1 General Mode (Mode 0)

type When M0 = ON, M1 = ON, the module operates in mode 0
transmit
The user can enter data through the serial port, and the module will start wireless transmission.
The wireless receiving function of the module is turned on, and after receiving wireless data, it will be output through the
reception
TXD pin of the serial port.

7.2 WOR mode (mode 1)

type When M0 = OFF and M1 = ON, the module operates in mode 1
transmit
When defined as a transmitter, the wake-up code is automatically incremented for a certain period of time before launching
reception Data can be received normally, and the receiving function is equivalent to mode 0

7.3 Configuration Mode (Mode 2)

type When M0 = ON, M1 = OFF, the module operates in mode 2
transmit
Wireless transmission is off
Copyright©2012–2022，Chengdu Ebyte Electronic Technology Co.,Ltd.
OFF
mode
Deep sleep
OFF OFF
mode
The user accesses the registers through the serial port to control
ON the working status of the radio, and the user can configure the
module through the host computer configuration software.
The station goes into hibernation
E90-DTU(400SL33) User Manual