Program The Radio - Ebyte E96-DTU User Manual

Hide thumbs Also See for E96-DTU:

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

In the configuration of the host computer, the radio address, frequency channel, network ID, and key are all



displayed in decimal mode. The range of each parameter is:

Network address: 0～65535

Frequency channel: 0～83

Network ID: 0～255

Key: 0～65535

When using the host computer to configure the relay mode, the user needs to pay special attention. Since the



parameters in the host computer are in decimal display mode, the radio address and network ID need to be

converted when filling in the radio station address and network ID. If the network ID input by the transmitting

terminal A is 02 and the network ID input by the receiving terminal B is 10, when the relay terminal R sets the radio

address, the hexadecimal value 0X020A is converted to the decimal value 522 as the relay terminal R. Radio

address. That is, the radio address value that needs to be filled in by the relay terminal R at this time is 522.

10 Program the Radio

Operating mode

Configuration mode

1. Programming can only be carried out in a specific working mode (see the above table). If the programming fails,

please confirm whether the working mode of the radio is correct.

2. If you don't need complicated programming to open the E96-DTU (400SL30-485) configuration software, you can

modify the relevant parameters.

The indicator light is on

The indicator light is off

E96-DTU(400SL30-485) User Manual

注释

Only use the configuration software to

program the radio in the current mode

Table of Contents

400sl30-485