Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co.,Ltd.
④ Start two serial port debugging assistants, select the serial port baud rate to be 9600bps (default), and the check
method to be 8N1 to realize serial port transparent transmission;
⑤ If the customer needs to switch the working mode, it can be controlled by the Mode button to switch between
different working modes (M0 indicator, M1 indicator). Long press the Mode button for about 1ms and then release
it to switch the mode once. The mode switching details are shown in the table below:
Serial
number
mode 1
Transparent transmission mode
mode 2
mode 3
Configuration mode
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
Class
Lights off
WOR mode
Lights off
M1
M0
Lights off
Light on
Light on
Lights off
E96-DTU(400SL30-485) User Manual
Note
Serial port open, wireless open, transparent
transmission (factory default mode), support
special command air configuration.
Can be defined as WOR sender and WOR
receiver, support air wakeup
The user accesses the register through the
serial port to control the working status of the
radio station. The user can configure the radio
station through the upper computer
configuration software.
6
Advertisement
Table of Contents
