System Information; Features - ActronAir LR7-1W Operation Manual

Return to Home Page
Operation Manual

05. System Information

Model No.
Serial No.
The air conditioner model and serial number is situated on the access
Model No.
The wall controller model number is situated in front of the wall
Company Name
Phone Number
Technicians Name

06. Features

Auto-Restart After Power Failure
Should a power failure occur whilst the air conditioner is running,
1
the wall controller will restart the air conditioner in the same mode
when the power is restored, if this option is selected.
Dual/Triple Wall Control Operation (Optional)
Up to three wall controls can be installed on one system. This is
particularly useful on larger buildings, where you can have up
2
to three wall controllers in different locations. All connected
controllers will mimic any adjustment made in one controller
(restrictions apply).
Room Temperature Display with One Touch
3
Press the
change to show the room temperature for 10 seconds.
Auto Defrost Function (Heating Mode)
At certain outdoor conditions (low temperature) there may be a
build up of frost on the outdoor heat exchanger. This gradual build
up of frost reduces the performance of the air conditioner. The
4
system detects this frost build up and will automatically activate the
defrost mode.
The defrost mode is displayed on the wall controller by flashing the
DEFROST indicator every 10 seconds.
Hot Start Function (Heating Mode)
When the air conditioner starts in heating mode, the indoor fan is
delayed for a short period of time, this allows the heat exchanger
5
to warm up before the air flow starts, thus minimising cold drafts.
The hot start feature also activates itself when the system finishes
defrosting.
Filter Clean Light
The system monitors the accumulated run time of the air
6 conditioner and after a preset number of hours have expired,
the FILTER indicator will flash, indicating it's time to check if filter
requires cleaning.
Self Diagnosis
In the unlikely event that a fault develops with the air conditioner
7
the system will detect a fault and displays the relevant fault code on
the wall controller.
NOTE
Some applications may require cleaning of the filter at more regular
intervals.
Air Conditioner
panel of the outdoor unit bottom left corner.
Wall Controller
or button and the set temperature display will
LR7 Wall Controller
controller.
Installer
Page 7