Return to Home Page
Operation Manual
13.02. Setting the Clock
The system's status must be On before performing
these procedures.
1. Press the
2. Press the
Menu 02.
3. Press the PROG button to enter Program Menu
02. Display will show clock display. Hour field and
TIME is blinking.
4. Press the
/ PM will adjust after the 12th hour.
5. Press the PROG button to accept the desired hour.
Minute field will start blinking.
6. Press the
PROG button to enter program Menu.
or
button to navigate to Program
button to adjust the Hour. AM
or
or
button to adjust the Minutes.
LR7 Wall Controller
Page 22