Table of Contents
Advertisement
Return to Home Page
Operation Manual
08. Turning Air Conditioner On/Off
NOTE
The air conditioning system will re-start on your last settings and operating
mode e.g. 22
o
C set temperature, AUTO mode, HIGH fan speed.
The display will show the Set Temperature, Fan Speed, Fan Mode and Mode of
Operation.
08.01. Turn On and Off the Air Conditioner
1. Press the
button once again to turn Off.
NOTE
The
button back light will illuminate when unit is turned on.
The
button back light will not be illuminated when unit is turned off.
09. Adjusting Set Temperature
Press either the
or decrease the temperature correspondingly.
NOTE
• For a WARMER room temperature, press the
• For a COOLER room temperature, press the
• The Set Temp is adjustable between 16°C and 30°C in 0.5°C increments.
• The Set Temp is adjustable in controller even when the system is OFF.
• No Set Temp displayed during Fan-Only Mode.
10. Changing Operating Mode
NOTES
• Available Fan Speed are LOW, MED, HIGH, LOW CONT, MED CONT and
HIGH CONT.
• When in Fan-Only Mode LOW CONT, MED CONT and HIGH CONT will not
be available.
• When the system is On, the Indoor Fan can run continuously and is
indicated by the CONT indicator on the LCD. This is generally preferred
during the Cooling Mode to ensure maximum air circulation. When set
to LOW, MED or HIGH the fan will cycle with the compressor operation
according to set point and room temperatures.
10.01. Fan-Only Operation
1. Press the
display.
2. Adjust the Indoor Fan speed (LOW, MED and
HIGH) by pressing the
you reach the desired speed.
NOTE
Additionally, whilst the system is OFF, pressing the
Fan Only operation.
button once to turn On and Press the
or
button to either increase
button until FAN appears on the
LR7 Wall Controller
button.
button.
button successively until
button will allow
Page 10
Hide quick links:
Advertisement
Table of Contents
