ActronAir LR7-1W Operation Manual page 24

Return to Home Page
Operation Manual
1. Press the PROG button to enter program Menu.
2. Press the
Program Menu 03.
Press the PROG button to enter Program Menu
3.
03. Display will show SET BACK indicator and OFF
field is blinking.
4. Press the
ON.
5. Press the PROG button to confirm the selection.
6. Press the EXIT button thrice to go back to Main
Screen.
13.03.02. Setting Temperature Set back
NOTE
The Set back mode Cool to and Heat to limits can only be adjusted
from the temperature set back menu.
In the occurrence of when the unit's setpoint (prior to Set back
operation) is below the Heat to limit or higher than the Cool to
limit, the unit's setpoint will automatically become the new Set
back limit.
1. Press the
or button to navigate to
button to scroll from OFF to
or
PROG button to enter program Menu.
LR7 Wall Controller
Page 24