Return to Home Page
Operation Manual
3. Press the PROG button to enter Program Menu 03.
NOTE
Display will show set back display. ON field is blinking.
4. Press the
OFF.
5. Press the PROG button to confirm the selection.
6. Press the EXIT button once to go back to Main
Screen.
13.04. Mode Lock
13.04.01. Activating Mode Lock
NOTE
• Mode Lock will prevent user from changing the mode of operation based
on previous mode being used.
• Mode Lock may be set independently on each wall controller connected.
1. Ensure that the controller is set to the mode you
wished to lock to.
2. Press the PROG button to enter program Menu.
3. Press the
Program Menu 04.
button to toggle from ON to
or
or
button to navigate to
LR7 Wall Controller
Page 27