ActronAir LR7-1W Operation Manual page 18

Return to Home Page
Operation Manual
13.01.05. Repeating a Day's Events and Times
This feature allows you to automatically repeat
the previous days, events, and times, into the
succeeding days.
1. Proceed to the day you wish to copy the
programmed events and times. See Programming
the Events from previous page. SET, EVENT 1,
TIME CLOCK and ON will be illuminated in the
screen.
NOTE
For this example, events from Monday will be repeated on Tuesday.
Repeat function can only be applied to the succeeding day with
programmed events.
2. Press the PROG button until you reach the
succeeding day, TUE, to paste the copied
programmed events and times.
3. Press the REPEAT button.
4. You have now copied the previous day's events
into the current day displayed. Repeat steps 2 and
3 above for the remaining days where you wish to
repeat the programmed events and times.
13.01.06. Programming Past Midnight
NOTE
• Event On times can be set up to 11:45 PM of the current day.
• Event Off times can be set to the following day up to 23 hours and 45
minutes after the On time.
• If you program Event 1 past midnight, Event 2 will be automatically
cancelled.
LR7 Wall Controller
Page 18