Return to Home Page
Operation Manual
10.02. Cooling Operation
1. Press the
display.
2. Set the desired temperature by pressing either the
or
3. Adjust the desired Indoor Fan speed by pressing
the
HIGH, CONT LOW, CONT MED and CONT HIGH.
10.03. Heating Operation
1. Press the
display.
2. Set the desired temperature by pressing either the
or
3. Adjust the desired Indoor Fan speed by pressing
the
HIGH, CONT LOW, CONT MED and CONT HIGH.
NOTE
Setting the indoor fan speed to continuous mode can cause cool drafts when
operating the system on heating mode during compressor off cycles.
10.04. Auto Operation
1. Press the
display.
2. Set the desired temperature by pressing either the
or
Adjust the desired Indoor Fan speed by pressing
the
HIGH, CONT LOW, CONT MED and CONT HIGH.
button until COOL appears on the
buttons.
button. Available settings are: LOW, MED,
button until HEAT appears on the
buttons.
button. Available settings are: LOW, MED,
button until AUTO appears on the
button.
button. Available settings are: LOW, MED ,
LR7 Wall Controller
■
Page 11