Table of Contents
Advertisement
5
5.4.20 Serial Interface through COM Port (CPU or MSER4-Board)
Hazardous Area
Fig. 5-25: Serial interface through COM port (via CPU or MSER4)
Cable length and the connection resistors
Consider the recommendations made with regards to cable length
and connection resistors in refer to chapter
Recommendations for Signal and Data Cable
Hints on parameterization
Branch <device> – Basic System – I/O boards –
Board <x>: MSER4
Select the following values:
•
channels CH1/CH2 of the CPU: appropriate Driver mode:
RS232, RS422 or RS485
enCore FC1
Safe Area
Operating Instructions
Assembly Instructions
enCore device
COM port RJ45
(CPU or MSER4 board)
5.4.1 General
(p. 47).
Page 73 of 97
Advertisement
Table of Contents
