Lectrosonics DCR822 Instruction Manual page 15

Compat Mode:
Allows user to set compatability mode per channel. Choose from: D2, JA Hybrid, NU Hybrid, EU Hybrid, NA Hybrid,
DCHX on both channels, DCHX on channel 1 or 2, Duet on both channels, Duet on channel 1 or 2.
Output Type:
Allows user to choose output of each channel, analog or AES3
Routing:
Allows user to choose where to send RX1 and 2, to either output
channel or both.
Smart NR:
Allows user to enable Smart Noise Reduction on either channel or both
Talkback:
Allows user to enable Talkback function on either channel or both.
Polarity:
Allows user to set audio polarity of each channel as either positive or negative.
SD Card Settings
Files:
Allows user to access file list saved as .WAV format. Selecting a specific .WAV file will display date, time, and length of
recording.
Takes:
Lists files on the SD card in the Scenes and Takes format. Files are listed in the form of SXX TXXX. Selecting a file will
display date, time, and length of recording.
Record:
Starts the DCR822 in recording mode, using the specified format in Settings>SD Card>File Naming. Record will
change to Stop once recording has begun.
Scene & Take:
Allows user to set scene and take file naming starting point. Subsequent starts and stops of recordings will increment
the take number.
Format Card:
Prompts user for confirmation of erasing files and preparing card for recording of audio files.
File Naming:
Allows users to set the naming format of file between:
- Sequence
- Clock Time
- Scene&Take
Rio Rancho, NM
Dual Channel Digital Reciever
15