2.10.5 Removing stator
Unsoldering must be finished as quickly as possible.
Extended heating will damage the diodes.
Cut off the joint of the stator and remove the stator from the
rectifier.
2.10.6 Removing regulator assembly
Remove the screws of the regulator assembly and then
remove the regulator assembly.
2.10.7 Removing rectifier assembly
(1) Remove the screw and nut from the rectifier.
(2) Remove the rectifier assembly.
Removing stator
Removing regulator assembly
Screw
Rectifier assembly
Removing rectifier assembly
ELECTRICAL SYSTEM
Stator core
Rectifier
Soldering
Screws
Regulator
assembly
Nut
Rear bracket
12-41