Preparation Before Disassembling; Removing Magnetic Switch; Removing Rear Bracket - Mitsubishi L Series Service Manual

2.7.1

Preparation before disassembling

Mark the mating marks on magnetic switch, front bracket,
center bracket, yoke and rear bracket to each other for
reassembly.
2.7.2

Removing magnetic switch

Disconnect the leads, and remove the magnetic switch.
2.7.3

Removing rear bracket

Remove the through bolts and screws of the brush holder,
and then remove the rear bracket.
ELECTRICAL SYSTEM
Preparation before disassembling
Mounting screw
Removing magnetic switch
Removing rear bracket
Connector
Magnetic
switch
Through bolt
Screw
12-27