Removing Swivel Nipple; Removing Tappets; Removing Plunger - Mitsubishi L Series Service Manual

2.4.1

Removing swivel nipple

(1) Grab the plunger of the pump housing with a vise.
(2) Remove the swivel nipple from the pump housing.
2.4.2

Removing tappets

(1) Turn the pump housing upside down and grab the
housing with a vise.
(2) Remove the stop wire bracket and remove the control
rack.
(3) Push in the tappet and, pull out the tappet guide pin
with tweezers.
(4) Remove the tappet.
2.4.3

Removing plunger

Using tweezers, remove the tappet shim plate, spring lower
seat, plunger, plunger spring, spring upper seat and control
sleeve from the pump housing.
Swivel nipple
Vise
Removing swivel nipple
Stop wire bracket
Removing stop wire bracket
Tappet guide pin
Removing tappet guide pin
Tappet shim plate
Spring lower seat
Removing plunger
FUEL SYSTEM
Pump housing
Control rack
Pump
housing
Tappet
Plunger
Plunger spring
Spring upper
seat
Control sleeve
8-13