Pulling Out Piston; Removing Piston Ring; Removing Piston Pin - Mitsubishi L Series Service Manual

4.4 Pulling out piston

(1) Turn the crankshaft to bring the piston to the top dead
center.
(2) Using a piece of wood such a hammer handle, push the
mating surface of the connecting rod cap, and pull the
piston and connecting rod upward from the cylinder.

4.5 Removing piston ring

Remove the piston rings using piston ring pliers.

4.6 Removing piston pin

Remove the piston pin using a piston pin setting tool.
Special tool name
For L2A, L3A
Piston pin
For L2C, L3C
setting tool
For L2E, L3E
Part
ldentification
descrip-
mark
tion
D18
Push rod
D21
Part No.
30L91-00030
30L91-00020
30L91-10010
Applicable to
For18mm [0.70868 in.]
piston pin
Forφ21mm [0.82677 in.]
piston pin
DISASSEMBLY OF BASIC ENGINE
Connecting rod
Pulling out piston
Removing piston ring
Identification mark
Connecting rod
Removing piston pin
Pushrod
Piston pin
Piston pin
setting tool
5-17