RGBlink MSP 329 User Manual page 8

MSP329 RX
No. Name Description
POWER
1
Indicator
STATUS
2
Indicator
Working
3
Mode
Switch
Link DIP
DIP: this DIP switch consists of four manual switches, which are used to route
Switch
audio, video together with IR, and USB signals between MSP329 TX and
4
MSP329 RX based on their positions. By default, each individual switches is in
the up position. For more information, see "Using DIP Switch to Perform
1 2 3 4
Routing".
O N D I P
USB DEVICE: connect the two USB type A ports to a USB keyboard and mouse.
The connections are USB 2.0 compatible, providing +5 VDC at up to 500 mA to
connected USB peripherals.
USB Port
Note:
for
5

Peripherals

MSP329
On MSP329 RX is powered on.
Off MSP329 RX is powered on.
MSP329 RX is connected to MSP329 TX and the video is
Solid On
displayed.
MSP329 RX is disconnected from MSP329 TX.

Blinking
MSP329 RX is disconnected from an active video source.

MSP329 RX is powered off.

Off MSP329 RX is in the boot process.

Network is down.

In this mode, you can connect the rear panel RS232 port to a
NORMAL
RS232 device such as a computer for bi-directional serial
(Default)
communication with a RS232 device on the IP controller side.
In this mode, you can connect the rear panel RS232 port to a
DEBUG
RS232 device such as a computer for debugging MSP329 RX.
This device supports most standard keyboard keys and mouses, including
standard 84/101/104 keyboard keys and most of multimedia or system
control keys.
Wired keyboards and mouses are recommended for optimal performance.
User Manual
7