Table of Contents
Advertisement
6. Configure Master and Slave.
Right click the RX to which the mouse and keyboard are connected and choose Select Master >
right click the other one and choose Select Slave > Click Apply > OK.
Note: To cancel Select Master/Select Slave setting, right click on the RX and choose Delete
Master/Delete Slave.
7. Reboot the RX to make the Mouse Roaming configuration to take effect.
Click Batch Commands > Others > select RX device > Reboot > Apply.
Please wait for a few seconds for the RX device reboot.
MSP329
User Manual
23
Advertisement
Table of Contents
