Page 1
MSP 232 Quick Start ● Mic to line level pre-amp ● Variable impedance ● Txtend microphone compatibility & device support ● Dual USB power outputs ● Convenient DC power thru...
PRODUCT INTRODUCTION The MSP 232 is a converter of microphone to line level pre-amp. It is developed based on mini's requirement for the microphones without power supply.It is also developed with function of noise reduction. The development of MSP 232 is composed of two parts, one is for microphone to linear audio, the other is for DC power,which is divided into 12V and USB 5V, and USB 5V power supply supports most intelligent devices in the market.
USE YOUR PRODUCT Connection Power: Connect MSP 232 input power jack with 12V/1.5A adapter,and connect MSP 232 output power jack and mini/mini+ or other devices supported 12V/1.5A with 6CM power switch cable.As shown in the figure below: Two USB power output:5V/1A(per port),5V/500mA(MAX).It can supply power to phone,fill light or other devices supported 5V/500mA.As shown in the figure below:...
Warranties are effective upon delivery date to customer and are non-transferable. RGBlink warranties are only valid to the original purchase/owner. Warranty related repairs include parts and labor, but do not include faults resulting from user negligence, special modification, lighting strikes, abuse(drop/crush), and/or other unusual damages.
Need help?
Do you have a question about the MSP 232 and is the answer not in the manual?
Questions and answers