Dip Switch For Perform Routing; Pc Configurator - RGBlink MSP 329 User Manual

DIP Switch for Perform Routing

3.2
Before using the DIP switch, check that routing operations were not performed by other the tools.
Otherwise, the switch function is disabled. If so, press and hold the rear panel RESET button in
decoder for less than five seconds to enable the DIP switch.
To route the video from source to display, toggle each individual switches of the front panel DIP
switch in decoder to the same positions as these in encoder. If you want to link the decoder to a
different encoder, change the decoder switch settings in the same way as how the encoder's switch
is positioned. If you want to remove their link relationship, reset decoder to its factory defaults.

3.3 PC Configurator

In addition to matrix switching between encoders and decoders via PC configurator, it allows users
to configure them, including HDCP Hybrid and HDMI Timing Hybrid to function fast switching.
1. Launch the HDMIoverIPConsole.exe on your computer to open its main page. (Ensure your PC,
TX and RX are on the same subnet.)
Click Search to search online devices.
MSP329 User Manual
15