Hioki 8841 Instruction Manual page 301

────────────────────────────────────────────────────
(4) Connecting
────────────────────────────────────────────────────
After completing the setting above, connect the devices.
Connecting the 8841/42 to an existing network
Connect the LAN connector of the 8841/42 to the hub using a straight
LAN cable or the 9642 LAN cable.
Connecting the 9941/42 to a PC one-to-one
A cross cable or straight cable and a cross connector are required. (The 9642
straight cable is supplied with a cross connector.)
A 100BASE cable is required for connecting to a 100BASE network using
the 100BASE card.
12.5 INTERFACE Screen (SYSTEM 4)
277