Hioki 8841 Instruction Manual page 232

208
────────────────────────────────────────────────────
Flashing cursor
NOTE
────────────────────────────────────────────────────
9.14 8940 F/V UNIT
(3) Set the threshold level.
1. Move the flashing cursor to the position shown in the
2. Use the function keys, or the Jog/Shuttle control to
Upon measurement of pulses that rise during dead time, the duty ratio is
determined from pulses that follow the dead time; the duty ratio of dead time
pulses is not measured.
Dead time
（50 μs）
figure on the left.
set the threshold value.
Function
display Meaning
: Increases in number, large step
: Increases in number, small step
: Decreases in number, small step
: Decreases in number, large step